Catalysts - Hardeners
All resins including GelCoat, PoolCoat and FlowCoats must be catalyzed with catalyst or hardener before use for chemical reaction to start turning the resin from a liquid to a solid, un-catalyzed resin simply will not harden. Catalysts are corrosive and must be handled with special care. The proper dispensers are strongly recommended for safe and accurate use.
Catalyst & Hardener Products
MEKP-NA2
Medium reactivity
Product Description:
This is your normal reactivity catalyst. Clear in colour.
Suitable for the curing of all 2-part fiberglass systems
- Gelcoat resins
- Laminating resins
- Casting Resin
- Bonding paste
- Pool coat Resin
Sizes Available: 20ml, 100ml, 500ml, 1kg, 5kg, 25kg / 30kg
MEKP-LA3
Low reactivity
Product Description:
This is your normal reactivity catalyst. Clear in colour.
Suitable for the curing of all 2-part fiberglass systems
- Laminating resins
- Casting Resin
- Bonding paste
- Pool coat Resin
Sizes Available: 25kg / 30kg
MEKP/VR
Low-Medium reactivity
Product Description:
This is your normal reactivity catalyst. Vanishing Red in colour.
Suitable for the curing all 2-part fiberglass systems
- Laminating resins
- Casting Resin
- Bonding paste
- Pool coat Resin
Sizes Available: 25kg / 30kg
MEKP-AAP
Fast reactivity
Product Description:
Acetyl acetone peroxide- high reactivity and fast cure catalyst. Clear in colour.
Suitable for:
- All resins
- RTM
- Infusion
- Cold press moulding
- Pultrusion
- Sheet moulding compound
Sizes Available: 25kg / 30kg
Heat Activator
Product Description:
This is your heat activated reactivity catalyst- Clear
Suitable for:
- Fire Retardant Resin
- Pultrusion Resin
Sizes Available: 25kg / 30kg
Benzoyl Peroxide Paste Tubes
Product Description:
This is the body filler catalyst
Suitable for:
- Polyester Resin
- Vinyl Ester Resins
- Body Fillers
Sizes Available: 25g to 25 / 30kg